Nikon D1 Manuel d'utilisateur télécharger pdf (Page 66)

Auto Bracketing

Bracketing is used to take a series of photographs of the same subject using

a variety of exposure values that “bracket” optimum value as determined by the

camera (or, in manual mode, by the photographer). This can be used to take

multiple shots of the same subject at different exposure settings without

stopping to adjust exposure compensation manually. Up to three photographs

can be taken at exposure settings varying from +2 to –2 EV (these values are

added to the value chosen for exposure compensation using the exposure

compensation function described on the previous pages). Bracketing can be

used in any exposure mode.

Holding down the BKT button (A), rotate the main command dial until BKT

appears in the control panel on top of the camera (B). The indicator in

the viewfinder and in the control panel on top of the camera will blink.

Note

A B

Holding the BKT button down (A), rotate the sub-command dial to choose

a bracketing program (B). The bracketing programs available depend on

Custom Setting 2 (see overleaf).

Camera Settings: Auto Bracketing

Changes to exposure are effected by changing the shutter speed (manual and

aperture-priority auto exposure modes), the aperture (shutter-priority auto), or both

shutter speed and aperture (programmed auto).

Flash and auto-exposure bracketing

If a Speedlight is attached when bracketing is in effect, both flash level (TTL level as

determined for the main subject) and auto-exposure will be changed for each

exposure regardless of the exposure mode. Camera settings can be changed so that

only one of flash-exposure bracketing or auto-exposure bracketing will be performed.

See “Custom Settings,” item 11.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 143 144

Pas de commentaire

Nikon D1 Manuel d'utilisateur Page 66