Nikon D1 Manuel d'utilisateur télécharger pdf (Page 43)

Notes

Sensitivity (ISO Equivalency)

Sensitivity can be set higher than the default setting (ISO 200 equivalent) when

taking photographs in low light conditions. Four settings (ISO 200, 400, 800,

and 1,600 equivalent) are available.

A B

To choose a sensitivity setting, turn the main command dial while holding down

the

button (A). Sensitivity settings are displayed in the rear control panel

(B) in the order shown below:

200 400 800 1600

To confirm the current sensitivity setting, press the

button. The current

setting for sensitivity will be displayed in the rear control panel.

Camera Settings: Sensitivity (ISO Equivalency)

The default setting of ISO 200 equivalent is recommended in most circumstances.

Photographs taken at other settings may include a slight amount of noise.

Sensitivity can be further increased by a factor of +1 or +2 over ISO 1600, making

fast shutter speeds possible when lighting is poor (see “Custom Settings,” item

31). Note that in this case photographs may display higher levels of noise. It is

recommended that you take a trial photograph and check the results before

shooting in this mode.

At a setting of +1, the sensitivity display in the rear control panel shows HI-1; at a

setting of +2, HI-2 is shown.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 143 144

Pas de commentaire

Nikon D1 Manuel d'utilisateur Page 43