Nikon SB-30 Manuel d'utilisateur télécharger pdf (Page 25)

Taking flash pictures with the COOLPIX

1 Make the necessary settings on the camera as with a normal Speedlight.

2 Set the SB-30’s Mode selector dial to Wireless slave flash (A).

• In wireless slave flash shooting, exposure compensation using the SB-30’s Exposure compensation

switch is not possible. In this case, make exposure compensation on the camera.

3 Check the aperture and flash shooting distance, then shoot.

• Press the Standby resume button/Slave flash firing cancel button to avoid accidental firing in sync

with other Speedlights. The SB-30 will not fire, while this button is pressed.

Taking flash pictures using film-based SLRs cameras

1 Set the master Speedlight, either the built-in Speedlight or one mounted on the camera, to fire.

• Be sure to cancel the master flash unit’s Monitor Preflash (p. 21).

2 Use the SB-30 as the slave flash unit and set it to the Wireless slave flash (A) mode.

• In wireless slave flash shooting, exposure compensation using the SB-30’s Exposure compensation

switch is not possible. In this case, make exposure compensation on the camera.

3 Check the aperture and flash shooting distance, then shoot.

• Press the Standby resume button/Slave flash firing cancel button to avoid accidental firing in sync

with other Speedlights. The SB-30 will not fire, while this button is pressed.

Basic operation

SB-30 -E 01.08 2002.12.26 17:23 ページ2 3

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 138 139

Pas de commentaire

Nikon SB-30 Manuel d'utilisateur Page 25