Nikon SB-800 Manuel d'utilisateur télécharger pdf (Page 109)

103

Set the camera’s exposure mode to Aperture-

Priority Auto (A) or Manual (M).

Set the camera’s metering system to Matrix

Metering Y or Center-Weighted Metering W.

Set the SB-800’s flash mode to TTL auto flash.

Position the built-in wide-flash adapter over the

flash head. Press the c or d button to adjust

the zoom-head position to 14mm or 17mm.

Tilt the flash head down to –7°.

• When the SB-800 is attached to the camera and used

as the only flash unit, this position is recommended to

ensure sufficient illumination of the lower portion of the

subject in close-up photography.

• The dotted line below the underbar appears when the

flash head is tilted down to this position.

Confirm that the ready-light is on, then shoot.

• When the flash has fired at its maximum output and

underexposure may have occurred, the ready-light on

the SB-800 blinks for approx. 3 sec. To compensate,

use a wider aperture or move closer to the subject

and reshoot.

7°

Advanced operations

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 131 132

Pas de commentaire

Nikon SB-800 Manuel d'utilisateur Page 109