Nikon SB-800 Manuel d'utilisateur télécharger pdf (Page 46)

Non-TTL auto flash mode

Non-TTL auto A flash

The SB-800’s built-in sensor measures the flash illumination reflected from the

subject, automatically controlling the SB-800’s light output to give the correct

exposure. This allows you to make exposure compensation (p. 54) easily by

varying the aperture set on the camera or lens.

• No limitation on usable cameras.

• Auto Aperture flash (p. 38) is automatically set (default setting) when the SB-800 is used

with cameras compatible with CLS, digital SLRs not compatible with CLS, cameras in

Groups I and II in combination with a CPU lens, and COOLPIX cameras compatible

with i-TTL. To cancel Auto Aperture flash and set to Non-TTL auto flash, use Custom

settings (p. 67).

Set the camera’s exposure mode to Aperture-

Priority Auto (A) or Manual (M).

Press the a button to display A on the

LCD panel.

Press the e or f button to change the aperture,

bringing the subject within the flash shooting

distance range.

Set the aperture that appears on the SB-800’s

LCD panel on the lens or camera.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 131 132

Pas de commentaire

Nikon SB-800 Manuel d'utilisateur Page 46