Nikon Multi-Power Battery Pack G02 Manuel d'utilisateur télécharger pdf (Page 23)

Inserting Batteries

The MB-D11 can be used with one EN-EL15 rechargeable Li-ion battery, or with six AA batteries.

Before inserting batteries, be sure that the camera is o and that the MB-D11 control lock is in the L position.

1 Turn the MB-D11 battery-chamber latch to

and remove the battery holder (Figure E).

2 Ready the batteries as described below.

EN-EL15: Matching the indentations on the battery to the projections on the MS-D11EN holder, insert the battery with the arrow (▲) on the bat-

tery toward the battery holder power terminals (Figure F-

Press the battery lightly downward and slide it in the direction of the arrow until

the power terminals click into place (Figure F-

AA batteries: Place six AA batteries in the MS-D11 battery holder as shown in Figure G, making sure that the batteries are in the correct orienta-

tion.

3 Insert the battery holder in the MB-D11 and latch the battery-chamber cover (Figure H).

Make sure the holder is fully inserted before turning the

latch.

4 Turn the camera on and check the battery level in the control panel or view nder. If the camera does not turn on, check that the battery is cor-

rectly inserted.

The EP-5B Power Connector

When using the EP-5B power connector, insert it into the MS-D11EN holder with the arrow (▲) on the connector toward the battery power terminals.

Press

the connector lightly downward and slide it in the direction of the arrow until the power terminals click into place (Figure I-

Open the holder power

connector cover and pass the EP-5B power cable through the opening (Figure I-

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 331 332

Pas de commentaire

Nikon Multi-Power Battery Pack G02 Manuel d'utilisateur Page 23