Nikon SB-910 Manuel d'utilisateur télécharger pdf (Page 49)

C–10

Flash Modes

Taking a picture in non-TTL auto flash mode

Press function button 3 to

highlight the aperture.

Rotate the selector dial to

set aperture. Note that the

effective ﬂ ash output distance

range varies depending on

aperture.

Aperture can be changed with function •

button 3.

Correct exposure can be obtained when •

the actual flash-to-subject distance is

within the effective flash output distance.

Press the [OK] button.

Set the same aperture in

the lens or camera as the

Speedlight.

Conﬁ rm the ﬂ ash-ready

indicator is on, and then shoot.

v When insufﬁ cient ﬂ ash output for correct exposure is indicated

When the ﬂ ash-ready indicators on the SB-910 and in the camera’s viewﬁ nder blink

for approx. 3 seconds after a picture is taken, underexposure due to insufﬁ cient

ﬂ ash output may have occurred. To compensate, use a wider aperture or higher ISO

sensitivity, or move the ﬂ ash unit closer to the subject and reshoot.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 135 136

Pas de commentaire

Nikon SB-910 Manuel d'utilisateur Page 49