Nikon WP-CP2 Manuel d'utilisateur télécharger pdf (Page 19)

Check for Leaks Again

Before use, be sure that the camera is functioning normally and that the

case does not leak. Failure to check for leaks before use could result in

irreparable damage to the camera.

Important!

After sealing the case, perform a ﬁ nal check for leaks.

Immerse the case in water and check for leaks as

described in Steps 3–6 of “Check the Case for

Leaks” ( 6). Check that the desiccant stays dry

and that no water enters the case. If a leak is

detected, immediately remove the case from the

water, dry the camera and case thoroughly, and

check that the O-ring is intact and the case prop-

erly sealed. If the cause of the leak can not be

determined, take the case to a Nikon-authorized

service representative.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Pas de commentaire

Nikon WP-CP2 Manuel d'utilisateur Page 19