Nikon MB-D80 Manuel d'utilisateur télécharger pdf (Page 19)

The AE-L/AF-L Button

The MB-D80 is equipped with an alternate AE

L/AFL button for use when taking photographs

in “tall” (portrait) orientation.

D80: The MB-D80 AEL/AFL button performs the

same functions as the AEL/AFL button on the

camera and is aﬀ ected by changes to Custom

Setting 18 (

AE-L/AF-L

). See the camera Guide

to Digital Photography for details.

D90: The function performed by the MB-D80

AEL/AFL button can be chosen using Custom

Setting a6 (

AE-L/AF-L for MB-D80

). See the

camera manual for details.

Using the Battery Pack

Attaching the Battery Pack

Before attaching the battery pack, be sure that the camera is oﬀ and that the MB-D80 control lock

(Figure A- ) is in the L position (the illustrations show the D80).

1 Remove the contact cap (Figure A- ) from the battery pack. Be sure to replace the cap when

the MB-D80 is not in use. The cap can be threaded onto the camera strap when removed from

the battery pack.

2 Open the camera battery-chamber cover and remove it from the base of the camera handgrip

as shown in Figure B. Remove the battery, if present, and place the camera battery-chamber

cover in the battery-chamber cover holder (Figure C).

A PB-6D and PK-13 auto-extension ring are required when using PB-6 bellows with the

MB-D80.

3 Insert the MB-D80 as shown in Figure D.

4 Firmly tighten the attachment wheel by rotating it in the direction shown by the LOCK arrow

(Figure E).

Removing the Battery Pack

To remove the MB-D80, turn the camera oﬀ and set the control lock on the MB-D80 to L and then

follow the above steps in the reverse order.

Be sure to place the camera battery-chamber cover in the battery-chamber cover holder to prevent

loss.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 137 138

Pas de commentaire

Nikon MB-D80 Manuel d'utilisateur Page 19